finder工业继电器，finder中国总代理

finder“一般技术资料”第五页
接触规格
触点配置2 CO（DPDT）1 CO（SPDT）
额定电流/zui大峰值电流A 8/15 16/25 * *使用AgSnO2材料
zui大峰值电流为
80 A - 5 ms?？?br />。
额定电压/
zui大开关电压V AC 250/440 250/440
额定负载AC1 VA 2000 4000
额定负载AC15（230 V AC）VA 350 750
单相电机额定值（230 V AC）kW 0.37 0.55
断开容量DC1：30/110 / 220V A 6 / 0.5 / 0.15 12 / 0.5 / 0.15
zui小开关负载mW（V / mA）300（5/5）300（5/5）
标准接触材料AgNi AgNi
线圈规格
标称电压（UN）V AC（50/60 Hz）12 - 24 - 48 - 110 - 120 - 230 - 240
V DC 12 - 24 - 48 - 110 - 125
额定功率VA / W 1.2 / 0.5 1.2 / 0.5
工作范围AC（0.8 ... 1.1）UN（0.8 ... 1.1）UN
DC（0.73 ... 1.1）UN（0.73 ... 1.1）UN
保持电压AC / DC 0.8 UN / 0.4 UN 0.8 UN / 0.4 UN
必须退出电压AC / DC 0.2 UN / 0.1 UN 0.2 UN / 0.1 UN
技术数据
机械寿命AC / DC循环10·106 10·106
额定负载时的电气寿命AC1周期100·103 100·103
操作/释放时间ms 10/3 15/5
线圈间绝缘
和触点（1.2 / 50μs）kV 6（8 mm）6（8 mm）
介电强度
开启触点之间V AC 1000 1000
环境温度范围°C -40 ... + 70 -40 ... + 70
环保RT II RT II
finder工业继电器，finder中国总代理

Industrial relays

Series 46 - Miniature Industrial relay 8 - 16 A

Miniature industrial relays

• - DC coils, 500 mW or AC coils, 1.2 VA
• Socket mount or direct connection via Faston connectors
• Available with lockable test button, mechanical flag & LED indicator
• 8 mm, 6 kV (1.2/50 μs) isolation, coil-contacts

認證 （根據類型）

• DOCUMENTATION
•  
• DXF
•  
• 3D IMAGE

Series 55 - Miniature General Purpose Relays 7 - 10 A.

General purpose relays

• AC & DC coils
• PCB or Plug-in mounting
• Available with lockable test button, mechanical flag & LED indicator

認證 （根據類型）

• DOCUMENTATION
•  
• DXF
•  
• 3D IMAGE

Series 56 - Miniature Power Relays 12 A

Miniature power relays

• AC & DC coils
• PCB or Plug-in mounting
• Flange mount option (Faston 187 termination)
• Available with lockable test button, mechanical flag & LED indicator

認證 （根據類型）

• DOCUMENTATION
•  
• DXF
•  
• 3D IMAGE

Series 60 - General Purpose Relays 6 - 10 A

General purpose relays

• AC & DC coils, including “current sensing” versions
• 8 & 11 pin plug-in
• Flange mount
• Available with lockable test button, mechanical flag & LED indicator
• Version with bifurcated contacts for low level switching

認證 （根據類型）

• DOCUMENTATION
•  
• 3D IMAGE

Series 62 - Power Relays 16 A.

Power relays

• AC & DC coils
• Magnetic blow
• PCB mount or Plug-in mount (Faston 187) or Flange mount (Faston 250)
• NO contacts options, > 3mm contact gap
• LED, mechanical indicator & test button options

認證 （根據類型）

• DOCUMENTATION
•  
• DXF
•  
• 3D IMAGE

Series 65 - Power Relays 20 - 30 A.

Power relays

• AC & DC coils
• PCB mount or Flange mount (Faston 250)
• NO version, > 3 mm contact gap

認證 （根據類型）

• DOCUMENTATION
•  
• DXF
•  
• 3D IMAGE

Series 66 - Power Relays 30 A

Power relays

• AC & DC coils
• ATEX compliant (EX nC) option available
• PCB mount or Flange mount (Faston 250)
• 8mm, 6kV (1.2/50 μs) isolation, coil - contacts

認證 （根據類型）

• DOCUMENTATION
•  
• DXF
•  
• 3D IMAGE

Series 67 - Solar relay 50 A

Power relay for photovoltaic inverters

• DC coils, with only 170 mW holding power
• Contact gap ≥ 3 mm (according to VDE 0126-1-1, EN 62109-1, EN 62109-2)
• Reinforced insulation between coil and contacts
• 1.5 mm gap between PCB and relay base
• Suitable for use at ambient temperatures up to 85 °C (with energy-saving coil energization) or 70 °C (with standard coil energization)

認證 （根據類型）

• DOCUMENTATION
•  
• DXF
•  
• 3D IMAGE

Series RB - Bistable relay 8 A

Bistable relay

• 2 or 4 pole changeover contact
• DC voltage
• 2 coil type
• SET and RESET signals
• 35 mm rail (EN 60715) mount
• Pin socket type 90.21 mount

認證 （根據類型）

• DOCUMENTATION
•  
• DXF

Series RR - Fast relay module 8 A

Fast relay module

• 4 pole changeover or 3 NO + 1 changeover contacts
• DC voltage
• Operate time ≤ 3 ms
• LED command status indication
• 35 mm rail (EN 60715) mount
• Pin socket type 90.21 mount

認證 （根據類型）

• DOCUMENTATION
•  
• DXF

finder工业继电器，finder中国总代理