湖南一品楼qm论坛,一品楼品凤楼论坛官网,栖凤阁论坛最新版下载,全国威客小姐最新消息

Bürkert宝德流量计接头种类及特性
Bürkert类型
产品照片Typ S030
类型S030
INLINE传感器与桨叶轮进行流量测量
DN06到DN65
封闭的管道系统，传感器内部配件
四分之一转技术
变送器可用于指示，监控，传输，开/关控制，批量控制
传感器配件S030内置桨轮来测量流量。当液体流经管道时，桨叶轮会产生脉冲，其频率与流量成正比。 Bürkert“INLINE Quarter-turn技术”是一种确保...
Bürkert类型
?产品照片Typ S030
类型S030
INLINE传感器与桨叶轮进行流量测量
DN06到DN65
封闭的管道系统，传感器内部配件
四分之一转技术
变送器可用于指示，监控，传输，开/关控制，批量控制
Bürkert类型
?产品照片类型SE32
类型SE32
变送器用于INLINE传感器安装
与带有叶轮的INLINE传感器配件S030兼容，用于流量测量（参见数据表类型8032，S030）
与带有椭圆齿轮的INLINE传感器配件S077进行流量测量（参见数据表类型SE32 + S077）
Bürkert类型
?产品照片Typ S010
类型S010
INLINE传感器与叶片配合
用于连接到用于流量检测的SE10变送器（参见数据表流量开关8010型
Bürkert类型
?产品照片Typ S012
键入S012
适合桨轮流量传感器
用于连接变送器类型SE11或类型SE12用于流量测量（参见数据表流量计类型8012和8011）
用于安装到DN06 ... DN65的所有管道或流体块系统中
Bürkert类型
?产品照片Typ S020
类型S020
插入配件用于流量或分析测量
适用于插入式测量设备的纯净，侵蚀性或受污染液体
大范围的过程连接：PVC，PP，PVDF，PE，不锈钢，黄铜的DN06至DN400
变送器可用于： - 指示，监测，传输 - 关/关控制，批量控制
Bürkert类型
?产品照片Typ S022
类型S022
适用于ELEMENT pH和电阻率电导率测量设备
适用于8202型和8222型ELEMENT发射机的通用适配器，适用于纯粹，腐蚀性或污染性液体
适应标准管道系统或将BürkertS020接头转换为S022接头
管道直径从DN 06（减少）到DN 110（塑料）或更大（不锈钢）
Bürkert类型
?产品照片Typ S039
类型S039
带光学测量原理的变送器的INLINE传感器与桨叶轮配合使用
用于连接SE39型变送器进行流量测量（参见数据表流量计型号8039）
用于安装到DN06 ... DN50的所有管道中
Bürkert宝德流量计接头种类及特性

Bürkert type

Type S030

INLINE sensor-fitting with paddle wheel for flow measurement

• DN06 to DN65
• Closed pipe system, sensor inside fitting
• Quarter-turn technology
• Transmitter available for Indication, Monitoring, Transmitting, On/Off control, Batch control

The sensor-fitting S030 has a built-in paddle wheel to measure the flow rate. When liquid flows through the pipe, the paddle wheel is set in rotation producing pulses which frequency is proportional to the flow rate. The Bürkert “INLINE Quarter-turn technology” is a construction ensuring a...

Get more information 

Bürkert type

Type S030

INLINE sensor-fitting with paddle wheel for flow measurement

• DN06 to DN65
• Closed pipe system, sensor inside fitting
• Quarter-turn technology
• Transmitter available for Indication, Monitoring, Transmitting, On/Off control, Batch control

Bürkert type

Type SE32

Transmitter for INLINE sensor-fitting

• Compatible with INLINE sensor-fitting S030 with paddle wheel for flow measurement (see datasheets types 8032, S030)
• Compatible with INLINE sensor-fitting S077 with oval gears for flow measurement (see datasheet type SE32+S077)

Bürkert type

Type S010

INLINE sensor-fitting with blade

• For connection to a transmitter type SE10 for flow detection (see datasheet flow switch type 8010

Bürkert type

Type S012

Fitting for paddle wheel flow sensors

• For connection to a transmitter type SE11 or type SE12 for flow measurement (see datasheets Flowmeter types 8012 and 8011)
• For installation into all pipes from DN06…DN65 or in fluid block systems

Bürkert type

Type S020

Insertion fitting for flow or analytical measurement

• Universal fitting for Insertion measuring device in pure, aggressive or contaminated liquids
• Large range of process connections: DN06 to DN400 in PVC, PP, PVDF, PE, stainless steel, brass
• Transmitter available for: - Indication, Monitoring, Transmitting -On/Off control, Batch control

Bürkert type

Type S022

Fitting for ELEMENT pH and resistive conductivity measurement devices

• Universal adaptor for type 8202 and 8222 ELEMENT transmitters in pure, aggressive or contaminated liquids
• Adaptation into standard piping systems or conversion of Bürkert S020 fittings into S022 fittings
• Pipe diameters from DN 06 (with reduction) up to DN 110 (plastic) or bigger (Stainless steel)

Bürkert type

Type S039

INLINE sensor-fitting with paddle wheel for transmitter with optical measuring principle

• For connection to a transmitter type SE39 for flow measurement (see datasheet flowmeter type 8039)
• For installation into all pipes from DN06…DN50

Bürkert type

Type S051

Magnetic-inductive flow-rate sensor, low flow rates

• For connection to a transmitter type SE56 (blind in compact version or with display in compact or remote version) for flow measurement (see datasheets types 8051 and SE56)
• Clean in place (CIP)
• Low-flow measurements on from 3 l/h

Bürkert type

Type S054

Magnetic inductive sensor with wafer connection for water treatment and general purpose applications

• For connection to a transmitter type SE56 (blind in compact version or with display in compact or remote version) for flow measurement (see datasheets types 8054/8055 and SE56)

Bürkert type

Type S055

Magnetic inductive sensor with flanges for water treatment and general purpose applications

• For connection to a transmitter type SE56 (blind in compact version or with display in compact or remote version) for flow measurement (see datasheets types 8054/8055 and SE56)

Bürkert type

Type S056

Magnetic inductive sensor with hygienic process connections

• For connection to a transmitter type SE56 (blind in compact version or with display in compact or remote version) for flow measurement (see datasheets types 8056 and SE56)
• Sanitary version, 3A certificate
• Dedicated to food & beverage or pharmaceutical applications
• Low-flow measurements on from 3 l/h

Bürkert type

Type S070

Inline oval wheel sensor

• DN 15 to 100
• INLINE Quarter-Turn technology
• Electronics for indication, monitoring, transmitting, On/Off control and batch control

Bürkert宝德流量计接头种类及特性