
意大利杰弗伦Gefran??楦殴?/span>
R-U16??橛?个光隔离数字输出,PNP型,24 VDC-3A,可用于向电子设备发送信号和OK,在额定电流限制内直接为VDC供电,或控制任何负载。通过固态继电器,接触器等
输出具有共用的GND端子,分为4组,每组2个输出,4个独立电源,每组大容量为,??樽苋萘课?。
分组创建可由外部设备独立分段的电路。
每个输出都具有短路,过载和过热?;ぃ⒕哂械缌鞲涸睾妥刺藕臠ED的电流回路。
R-U16安装在R-BUS(x)系列的背板上,从该背板接收电源。
描述
多16 2A输出
所有输出均具有短路和过载?;すδ?/span>
诊断LED用于电源,输出和报警
24 VDC输出的电源
提供可拆卸连接器
符合UL508
意大利杰弗伦Gefran功能模块化的根据是,如果一个问题有多个问题组合而成,那么这个组合问题的复杂程度将大于分别考虑这个问题时的复杂程度之和。这个结论使得人们乐于利用功能??榛椒ń丛拥奈侍夥纸獬尚矶嗳菀捉饩龅木植课侍狻9δ苣?榛椒ú⒉坏扔谖尴拗频胤指钊砑?,因为随着功能??榈脑龆啵淙豢⒌ジ龉δ苣?榈墓ぷ髁考跎倭耍巧杓乒δ苣?榧浣涌谒璧墓ぷ髁恳步黾?,而且会出现意想不到的软件缺陷。因此,只有选择合适的功能??槭坎呕崾拐鱿低车目⒊杀拘?。
Gefran??镽-U16,Gefran授权总代理

The R-U16 module has 8 optically isolated digital outputs, type PNP, 24 VDC-3A, and can be used to send signals and OKs to electronic devices, directly power loads in VDC within the limits of rated currents, or control loads of any kind via solid state relay, contactors, etc.
The outputs have the GND terminal in common and are divided into 4 groups of 2 outputs with 4 separate power supplies and maximum capacity of per group, 1 total for the module.
Division into groups creates circuits that are independently sectionable by external devices.
Each output is protected against short-circuit, overload, and overheating, and has current recycle circuitry for inductive loads and state signal LEDs.
The R-U16 is installed on the backplanes of the series R-BUS(x) from which it receives its power supply.
Gefran??镽-U16,Gefran授权总代理

